506-59-2
- Product Name:Dimethylamine hydrochloride
- Molecular Formula:C2H7N.HCl
- Purity:99%
- Molecular Weight:81.5452
Product Details;
CasNo: 506-59-2
Molecular Formula: C2H7N.HCl
Appearance: white crystals
Quality Factory Supply Top Purity Dimethylamine hydrochloride 506-59-2 Efficient Transportation
- Molecular Formula:C2H7N.HCl
- Molecular Weight:81.5452
- Appearance/Colour:white crystals
- Vapor Pressure:<0.1 hPa (25 °C)
- Melting Point:170-173 ºC (lit.)
- Refractive Index:1.4202 (estimate)
- Boiling Point:6.1 ºC at 760 mmHg
- PSA:12.03000
- Density:0.64 g/cm3
- LogP:1.02850
Dimethylamine hydrochloride(Cas 506-59-2) Usage
Chemical Properties |
white crystals |
Uses |
Dimethylamine hydrochloride is a precursor to several industrially significant compounds. It is also used as a catalyst and magnesium reagent for acetylation analysis.Dimethylamine hydrochloride has been used in the preparation of hexamethylmelamine-methyl-14C. It has also been used to prepare the standard solution of methylamine (MA), dimethylamine (DMA), trimethylamine (TMA), and trimethylamine-N-oxide (TMAO) while determing methylamines and trimethylamine-N-oxide in particulate matter. Dimethylamine hydrochloride is used as an intermediate in the manufacture of pharmaceuticals like ranitidine and metformin, amlodipine. It is used as a precursor of atrazine. It is associated with sodium acetate and used to carry out the Willgerodt- Kindler reaction to prepare amides. Its free base reacts with carbon disulfide to get dimethyldithiocarbamate which is used in rubber vulcanization. It is involved in the synthesis of dimethyl-(1-methyl-pyrrol-2-ylmethyl)-amine by reacting with 1-methyl pyrrole and formaldehyde. |
Flammability and Explosibility |
Nonflammable |
Purification Methods |
Crystallise the salt from hot CHCl3 or absolute EtOH. It also recrystallises from MeOH/ether solution. Dry it in a vacuum desiccator over H2SO4, then P2O5. Hygroscopic. [Beilstein 4 IV 132.] |
InChI:InChI=1/C2H7N.ClH/c1-3-2;/h3H,1-2H3;1H
506-59-2 Relevant articles
Dihydrogen bond intermediated alcoholysis of dimethylamine-borane in nonaqueous media
Golub, Igor E.,Gulyaeva, Ekaterina S.,Filippov, Oleg A.,Dyadchenko, Victor P.,Belkova, Natalia V.,Epstein, Lina M.,Arkhipov, Dmitry E.,Shubina, Elena S.
, p. 3853 - 3868 (2015)
Dimethylamine-borane (DMAB) acid/base pr...
The enthalpies of formation of bis(dimethylamino)cyanophosphine, (dimethylamino)dicyanophosphine, and tricyanophosphine
Al-Maydama, H. M. A.,Finch, Arthur,Gardner, P. J.,Head, A. J.
, p. 575 - 584 (1995)
The standard molar enthalpies of formati...
Studies in Cyclophosphazenes. Part 9. Influence of the Steric Requirements of the Amino-substituents on the Rates of Amination of 2-Amino-2,4,4,6,6-pentachlorocyclotri(λ5-phosphazenes)
Goldschmidt, Jacob M.E.,Licht, Eliahu
, p. 107 - 110 (1981)
Measurements of the rates of amination o...
Copper(II) complexes of tetradentate N2S2 donor sets: Synthesis, crystal structure characterization and reactivity
Sarkar,Patra,Drew,Zangrando,Chattopadhyay
, p. 1 - 6 (2009)
Two mononuclear and one dinuclear copper...
Norbornane-2-spiro-α-cycloalkanone-α′-spiro-2″-norbornane-5,5″,6,6″-tetracarboxylic dianhydride, norbornane-2-spiro-α-cycloalkanone-α′-spiro-2″-norbornane-5,5″,6,6″-tetracarboxylic acid and ester thereof, method for producing norbornane-2-spiro-α-cycloalkanone-α′-spiro-2″-norbornane-5,5″,6,6″-tetracarboxylic dianhydride, polyimide obtained by using the same, and method for producing polyimide
-
Page/Page column 55, (2016/10/17)
A norbornane-2-spiro-α-cycloalkanone-α′-...
Nucleophilic substitution reaction at the nitrogen of arylsulfonamides with phosphide anion
Yoshida, Suguru,Igawa, Kazunobu,Tomooka, Katsuhiko
supporting information, p. 19358 - 19361 (2013/02/22)
A novel nucleophilic substitution reacti...
506-59-2 Process route
- 67-56-1
methanol
- 56-93-9
benzyltrimethylammonium chloride
- 506-59-2
N,N-dimethylammonium chloride
- 103-29-7
1,1'-(1,2-ethanediyl)bisbenzene
- 108-88-3,15644-74-3,16713-13-6
toluene
- 100-51-6,185532-71-2
benzyl alcohol
Conditions | Yield |
---|---|
With water; at 30 ℃; for 2h; Further byproducts given; Irradiation;
|
27 % Chromat. 10 % Chromat. 45 % Chromat. 23 % Chromat. |
- 56-93-9
benzyltrimethylammonium chloride
- 506-59-2
N,N-dimethylammonium chloride
- 593-81-7
trimethylamine hydrochloride
- 103-29-7
1,1'-(1,2-ethanediyl)bisbenzene
- 108-88-3,15644-74-3,16713-13-6
toluene
- 100-51-6,185532-71-2
benzyl alcohol
Conditions | Yield |
---|---|
With water; In water; at 30 ℃; for 2h; Mechanism; Irradiation; 253.7 nm;
|
45 % Chromat. 27 % Chromat. 10 % Chromat. 77 % Chromat. 23 % Chromat. |
506-59-2 Upstream products
-
1585-74-6
dimethylchloroamine
-
85608-26-0
Winterstein acid hydrochloride
-
141-78-6
ethyl acetate
-
74-87-3
methylene chloride
506-59-2 Downstream products
-
104926-40-1
1H-imidazol-4-yl-N,N-dimethylmethanamine
-
56139-76-5
2-(N,N-dimethylaminomethyl)-1-methylpyrrole
-
15433-79-1
(5-dimethylaminomethyl-furan-2-yl)-methanol
-
5424-47-5
3-(dimethylamino)-1-(thiophen-2-yl)propan-1-one hydrochloride
Relevant Products
-
4-PIPERIDINECARBOXYLIC ACID T-BUTYL ESTER HCL
CAS:892493-65-1
-
Propofol
CAS:2078-54-8
-
Trimethylamine hydrochloride
CAS:593-81-7